TRUMPF Cutting Guide/Rail Connector for TPC165

Cladding Mate

TRUMPF Cutting Guide/Rail Connector for TPC165

Sale price£46.38

Cut, cut, cut

That is exactly what you can do if you connect two of the guide rails together.

Connect two or more guide rails together

If you have a 2m wide panel or are cutting down the length of the panel with the TRUMPF TPC165 panel cutter/plunge saw then you can connect two or more guide rails together.

Reduce fatigue & protect the panel

The 1.4m long cutting/guide rail extends the life of the TRUMPF TPC165 cutter whilst protecting the panel underneath. Sandwiched between the panel surface and the moving TPC165, the guide rail stops swarf and other material scratching the panel finish.

Factory finish cuts, first time

When using the rail, the operator can effortlessly follow straight lines without experiencing concentration fatigue.

Read more about the TRUMPF TruTool TPC165 by clicking here

Cut 200mm thick composite panels

With the new TruTool TPC 165 Panel Cutter, you can cut down or cut out windows in polyurethane & polyisocyanurate sandwich panels up to a thickness of 200mm in one operation, regardless of whether the panel surface is flat or profiled.

The TPC165 has a blade & chain that can be set at different depths. This means you can perform cutbacks as well as full cuts with no setup time.

With the 90 degree adjustable blade, you can easily and quickly produce right-angle cutouts (without the need for drilling pilot holes). Even cutouts on pre-mounted panels are easy work.

Features & Benefits of the TPC165

  • Dust extraction port for your safety
  • No need to drill pilot holes for cutouts for windows or doors
  • Long blade life in comparison to reciprocation and jigsaw
  • Very low HAV in comparison to reciprocation and Jigsaw
  • No curved cuts so flashings fit the first time.
  • Rail system prevents marking the panels from the saw movement
  • High cut quality - excellent for high finish buildings that use architectural panels
  • Much lighter & smaller than 350mm circular saws (max cut depth 120mm)
  • No need to flip over panels to cut through up to 165mm thick panels profiled or 200mm flat panels

Read more about the TRUMPF TruTool TPC165 by clicking here.

Want to hire the TPC165 to try it out? - call us on 0370 741 7600!